Thiết bị kiểm tra độ bền và va đập CHARPY / IZOD IMPACT TESTER cho nhựa và cao su model No.258, model No.25-L, model 258-UTL, model No.258-ZA

No.258 IMPACT TESTER

Standard

JIS/ISO

ASTM

Test Method

Charpy Impact Test

Izod Impact Test

Charpy Impact Test

Izod Impact Test

Base Standards

JIS B7739:2011、ISO 13802:1999

-

Reference Standards

JIS K7111-1:2012、ISO 179-1:2010

JIS K71110:1999、ISO 180:2000

ASTM D6110-10

ASTM D256-10

Hammer Capacity

※1(J)

0.5, 1, 2, 4, 5       7.5, 15, 25※2

1, 2.75, 5.5, 11, 22

2.7 or More

(Track Record: 0.5,1,2,4,5,7.5,15,25)

2.7

(Track Record: 1,2.75,5,11,22)

Anvil

JIS/ISO Charpy Anvil

JIS/ISO/ASTM Izod Anvil

ASTM Charpy Anvil

JIS/ISO/ASTM Izod Anvil

JIS/ISO Charpy Anvil Lift

Necessary

-

-

-

-

Hammer Impact Point Setting Gauge

JIS/ISO Hammer Impact Point Setting Gauge

Specimen Setting Gauge

JIS/ISO Charpy Specimen Setting Gauge

JIS/ISO  Izod Specimen Setting Gauge

ASTM Charpy Specimen Setting Gauge

ASTM  Izod Specimen Setting Gauge

Option

Digital(Touch Panel, PC)Ver., Safety Cover(Full Cover),Curtain for Littler Control, Hammer Additional Weight,

Mini Printer (Thermal paper 10 rolls)※3, CSV Down load Tool(includes LAN cable)※4, Analog Scale & Pointer, Windows PC ※5, Additional Weight for Main Body ※6

Impact speed

2.9m/s

3.8m/s

3.5m/s

3.46m/s

3.5m/s

Lift-up Angle

150°

Hammer Edge

R2±0.5mm、Angle：30±1°

R0.8±0.2mm

R3.17±0.12mm、Angle ：45±2°

R0.8±0.2mm

Anvil Edge Radius

R1±0.1mm

-

-

R3.17±0.12mm

Anvil Supporting Edge

-

R0.2±0.1mm

-

R0.25±0.12mm

Anvil Supporting Length

62+0.05mm※7

-

101.6±0.5mm

-

Anvil-Edge Distance

-

R22±0.2mm

-

R22±0.05mm

Main Body Dimensions

W500 × D350 × H850 mm

(Digital Touch Panel Spec : D+250mm, Curtain for Littler Control : W+520mm,

Safety Cover : W + 500mm × H + 275mm)

Main Body Weight

125 kg

(Digital Ver. : + 5kg, Curtain for Littler Control: + 5, Safety Cover: + 75 kg)

Power Source

Digital Type without Safety Cover、 AC 100 V, 1-Phase, 3 A, 50/60 Hz

Digital Type with Safety Cover 、AC 100 V, 1-Phase, 5 A, 50/60 Hz

Accessories

Assortment of Tools

※1 Custom Hammers can also be provided. kgf/cm Hammers are also available.

kinds of additional weights can be attached to a single hammer.

※2 50J Hammer is not available.

※3 Setting Gauge differs depending on the size of specimen thickness.

※4 Available when Digital Touch Panel Spec. is chosen.

※5 Required for the CSV Download Tool for the Digital Touch Panel Type spec.,

and Digital PC Type spec.

※6 Required when more than 15 J Hammer is used.

※7 This length is for JIS K7111-1. If other lengths are required, please let us know.

No.258-L IMPACT TESTER (WITH REFRIGERATING MACHINE)

Specifications are subject to change without notice.

Temperature Range

-35 °C to 60 °C (Refrigerator)

Safety Device

Hammer Setting Sensor (Interlock System on the Upper Door), Acrylic Safety Cover

Additional Specifications

Refer to the below table

Option

Software, Electric Hammer Release Device, Torque Adjustment Device (Only for Izod)

Power Source

AC 200 V, 3-Phase, 30 A, 50/60 Hz

Dimensions/ Weight (Approx.)

W1,100 × D1,160 × H1,760 mm, 450 kg

Specifications are subject to change without notice.

Test method

Charpy Impact Tester

Izod Impact Tester

Reference standards

JIS K7111, ISO 179, ASTM D6110

JIS K7110, ISO 180, ASTM D256

Capacity

0.5, 1, 2, 4, 5, 7.5, 15, 25 J

1, 2.75, 5, 11, 22 J

Lift-up angle

150°

150°

Impact speed (m/s)*

2.9, 3.8 (3.46)

3.5 (3.46)

Striking Edge Angle*

30 ± 1° (45 ± 2°)

75° (-)

Striking Edge Radius (mm)*

R2 ± 0.5 (R3.17 ± 0.12)

R0.8 (R0.79 ± 0.12)

Anvil-Edge Distance (mm)*

-

22 ± 0.2 (22 ± 0.05)

Support Length (mm)*

62 + 0.5 (101.6 ± 0.5)

-

Accessories

Specimen setting gauge, Block gauge, Torque wrench (Izod only)Specimen setting gauge, Block gauge, Torque wrench (Izod only)

No.258-UTL IMPACT TESTER（WITH ULTRA LOW TEMP.REFRIGERATING MACHINE）

Specifications are subject to change without notice.

Temperature Range

-50 °C to 60 °C (Refrigerator)

Safety Device

Hammer Setting Sensor (Interlock System on the Upper Door), Acrylic Safety Cover

Additional Specifications

Refer to the below table

Option

Software, Electric Hammer Release Device, Torque Adjustment Device (Only for Izod)

Power Source

AC 200 V, 3-Phase, 30 A, 50/60 Hz

Dimensions/ Weight (Approx.)

W1,670 × D1,480 × H2,130 mm, 710 kg

Specifications are subject to change without notice.

Test method

Charpy Impact Tester

Izod Impact Tester

Reference standards

JIS K7111, ISO 179, ASTM D6110

JIS K7110, ISO 180, ASTM D256

Capacity

0.5, 1, 2, 4, 5, 7.5, 15, 25 J

1, 2.75, 5, 11, 22 J

Lift-up angle

150°

150°

Impact speed (m/s)*

2.9, 3.8 (3.46)

3.5 (3.46)

Striking Edge Angle*

30 ± 1° (45 ± 2°)

75° (-)

Striking Edge Radius (mm)*

R2 ± 0.5 (R3.17 ± 0.12)

R0.8 (R0.79 ± 0.12)

Anvil-Edge Distance (mm)*

-

22 ± 0.2 (22 ± 0.05)

Support Length (mm)*

62 + 0.5 (101.6 ± 0.5)

-

Accessories

Specimen setting gauge, Block gauge, Torque wrench (Izod only)Specimen setting gauge, Block gauge, Torque wrench (Izod only)

No.258-ZA IMPACT TESTER (FULL AUTOMATIC)

Specifications are subject to change without notice.

Temperature Range

-40° 〜 80°(Refrigerator)

Hammer

Capacity 0.5 to 25 J(Charpy),Capacity 1 to 7.5 J(Izod) Automatic Lift-Up Device, Automatic Stop Device

Test Specimens

70 pcs × 3 Cassettes (Total 210 pcs)

*When W10 × T4 × L80 mm, Automatic Cassette Changing Device

Software

Windows Compatible

Option

Hammer Height Adjustment Device (Only for Charpy), Hammer Changing Device (3 Capacities), Low Temperature Chamber, Constant Temperature & Humidity Chamber, Specimen Size Measuring Device, Collect Table for Tested Specimens

Power Source

AC 200 V, 1-Phase, 10 A, 50/60 Hz

Air Source

0.5 MPa or More

Dimensions/ Weight (Approx.)

W1,150 × D1,050 × H1,950 mm, 700 kg